5/5 - (1 vote)

It is common knowledge that when you initially purchased your brand new cookware, it had a gleaming finish and was completely clean. However, after a few years, it should not come as a surprise if your cookware is filthy and coated in burned and greasy food.

In addition, due to the fact that it is washed and used on a daily basis, cookware eventually becomes worn out. Despite that, you shouldn’t allow it get you down! Even while it would seem that there is no way to mend your old cookware, there are really a few different methods that you can get it to look as if it were just purchased.

There are a great number of distinct approaches to cleaning your cookware. Your choice of approach will be determined by the kind of cookware you have available to you.

For instance, the procedure that you will use for your glass cookware will be different from the one that you would use for your steel pots. If you want your pans to seem as if they were just purchased, here are several strategies, ideas, and tactics that you may try.

Tips and Tricks to Make Your Pans Look Shiny and New Again

To make your old pans seem as good as new, here are some wonderful ways that you may utilize.

Baking Soda

One useful piece of advice is to clean your pots and pans with baking soda. Baking soda is an excellent tool that can be used to remove all of the oil and stains that have accumulated on your cookware. The greatest thing is that you can use it on almost any material.

You may even put baking soda on your pots very often without damaging either the material or the seasoning, as long as you follow the instructions carefully. Baking soda has the ability to remove even the most stubborn grease from pots and pans.

You will need the following items in order to clean your pots using baking soda:

  • Baking soda
  • Dry cloth
  • Lemon
  • Vinegar
  • Wooden spoon
  • Non-stick scrubbing brush

Enameled Cookware

Even while baking soda may be used to clean every kind of cookware, the way in which it should be used vary depending on the material that the cookware is made of. Cookware with an enameled surface has a non-stick surface, yet the surface of the cookware may get crusty.

Do not be concerned since there is a really simple method for cleaning it. The only thing you need to do is bring some water to a boil and then add some baking soda to it.

Fill the saucepan or pot with water, being careful to cover any areas that have been crusty or burned. Raise the temperature till the water is comfortable to the touch. Once the water has reached a rolling boil, measure out two teaspoons of baking soda and add it to the mixture while stirring it with a spoon.

Because it is quite easy to burn oneself, you should make sure the spoon you are using is made of wood rather than steel. Baking soda and water brought to a boil will combine in this manner to form a combination. Allow the ingredients to cook together for a little period.

Once the water has been allowed to come to a simmer, you may scrape the bottom of the pan to remove any browned oil that has formed. In order to clean the surface of your pan, all you need to do is make use of a dry towel. After wiping the pan, you should afterwards rinse it in warm water and then allow it to air dry.

Your enameled pot will have the appearance of being brand new.

Copper Cookware

Baking soda, lemon, and vinegar are the only things you need to clean a copper pot, and with just three things, you should be ready to go. The first thing you need to do is sprinkle baking soda all over the bottom of your pot or pan.

Make sure that the baking soda is spread evenly throughout the whole surface. When you are finished, fill the remaining space in the bottom of the pot with vinegar. The next thing you should do is exfoliate your face with a lemon.

To clean the residue from the bottom of your pan, scrape it with a cut-up lemon. You need to make sure that the whole surface is covered; there should be no exposed areas. You may also clean the sides if you think they need a little bit of attention as well. Rinse the pan well when you have finished washing it, and then dry it off with a clean towel.

Non-Stick Cookware

Simply using water and little baking soda is all that is required to clean non-stick cookware. Baking soda is an effective cleaning agent that may remove food odors as well as stains from the inside surface of pots and pans.

Making a paste is the very first thing you need to do. Putting water in the pan is one way to accomplish this goal. Simply pour enough water into the pan to cover the bottom, and then sprinkle baking soda all over the water.

After the paste has been created, the next step is to let the pan rest for a number of hours before proceeding. Baking soda, when combined with water, will cause a reaction that cleans the pan. After waiting a few hours, use a brush designed for nonstick surfaces to clean the pan, being sure to scrub vigorously enough to remove all of the oily residue.

When you are finished, just give the pan a quick rinse and pat it dry with a towel. Cleaning cookware that does not adhere to food is not only incredibly easy, but it also takes very little time. Give it a go, and you’ll be able to judge the difference for yourself.

Roasting Pans

Baking soda’s versatility extends to its usage as a cleaning agent for roasting pans. Baking soda, water, and a little bit of vinegar are all that are required to clean a roasting pot. The first thing you need to do is sprinkle baking soda all over the surface of the pan.

The next thing you need to do is take a cup of water and mix it with a third of a cup of vinegar. When you are finished, transfer the solution to the baking dish that you will be using. Baking soda and vinegar will interact with one another in a chemical reaction.

After that, you are going to want to let the pan a few hours to soak. After allowing the mixture to sit for a few hours, you should use a spoon or a spatula to scrape the surface of the pan. It is important to make sure that the pan is saturated in order to remove as much fat as possible from the bottom of the roasting pan. When you are through, all you need to do is give the pan a good cleaning and pat it dry with a towel.

Baking soda is an excellent problem-solving ingredient. It is able to eliminate any charring from your pan and make it seem as if it were brand new. If your favorite pan has been burned, the first thing you should do is add some water to it. You should add just enough water so that it covers the whole surface of the pan.

Adding baking soda is the following stage, after which you will see the mixture transforming into a thick paste. As soon as you are certain that the paste has formed, keep heating the pan until the water begins to boil. It is imperative that you take it out of the pan as soon as the water begins to boil; otherwise, you will wind up causing even more damage to the pot.

After removing the pot from the heat, you may easily clean it with a scrape or a wooden spoon by following the instructions below. Make sure to dry it off with a clean towel when you’ve finished washing and rinsing it, and ta-da! Your pot will have the appearance of having just been purchased.

Be cautious to wait until your cookware has cooled down before washing it after being cleaned with baking soda. This is especially important if you used the baking soda to remove stubborn stains. Always remember to let materials like stainless steel and cookware made of metal some time to cool down, since they are capable of reaching quite high temperatures.

In addition, you should never use cleaners that include bleach or even oven cleaners on your pots since these products have the potential to quickly harm your cookware. Always remember to use a dry towel to clean your pans after using them.

 Salt and Dish Soap

The use of salt and dish soap to clean your pots is yet another method that may be used to restore their brand-new appearance.

Salt and dish soap are the ideal cleaning agents to use if you want to clean your cookware but are concerned about ruining the flavor in the process. The following are some of the things that you will need to employ in order to get your pot to appear as good as new again.

  • Salt
  • Small container
  • Paper towel or cloth
  • Dish soap

The first thing you need to do is combine the dish soap and salt in a separate container. Mix them together well until a paste is formed. After you have prepared the paste, you may spread some of it onto a clean, dry towel and then use it to scrub the surface of the pan.

If you do not want the seasoning to get damaged in any way, be careful not to scrape too vigorously. If you believe that the pan need more cleaning, just add more salt and scrape it until the spots are removed. This approach, in addition to being simple to carry out, is also extremely successful in its application. Give it a go now!

Lemon and Water

If you want your pots to not only be clean but also smell pleasant, you could try cleaning them with lemons. In addition to water and vinegar, baking soda may also be used with lemon. The use of lemon juice is an effective method for removing stains from pots and pans, regardless of how crusty or oily the stains may be.

The first thing that has to be done is to slice a few lemons into very little pieces.

Put your pan on the stove over high heat and then add enough water to cover the top of it. Wait until the water has cooled down before using the lemons to scrape away the filth and grease. This should be done after the water has been brought to a boil. Scrubbing your pots and pans with cut-up lemons will not only remove all of the oil from them, but it will also make them seem as if they were just purchased.

Dryer Sheets

There are a lot of people who aren’t aware of this strategy, which is why it could seem to be a little bit unusual, but it is absolutely effective.

The following is a list of the goods that you will need to clean your pans using dryer sheets in order to make them seem as good as new.

  • Dryer sheets
  • Dish soap
  • Brush
  • Hot water

The first thing you should do is put some dishwashing liquid into your saucepan. The next step would be to pour boiling water over all of the sections that are either scorched or coated in grease. After that, put in the dryer sheet.

Be careful to soak the dryer sheet in the hot water until it is thoroughly covered. Just put the lid on the pan and let it aside for a couple of hours. The very last thing you need to do is take out the dryer sheets from the pot. The filth may be removed without any cleaning being necessary.

Bleach-Free Cleansers

Cleansers that do not include bleach are yet another excellent choice for cleaning your cookware and restoring its luster and “like-new” appearance. They are able to remove any form of rust, as well as filth and grease, from your pans.

The first thing you need to do is make a paste by combining the cleaner that does not include bleach with some water. When you have finished making the paste, be sure to use it to scrape the pan with a clean, gentle cloth. When you are finished, give the pot a quick rinse and then dry it off with a clean towel.

With these helpful hints, cleaning your pots won’t be such a chore anymore.

If your cookware has filthy spots or a burned bottom, rather than investing money on new pots and pans, consider one of these easy and efficient techniques to make your pots pristine and glossy now!

You may also like the following articles:

  • Do Pans Need to Be Sanitized?
  • How to Clean Burnt Pans?
  • What Pans Are Safest to Cook With?
  • When and How to Recycle Your Frying Pans?
  • How to Dispose of Old Cooking Pans?
  • How to Prevent Cooking Pans from Turning Black over Flame?
  • How to Clean Baking Pans?
  • How to Polish Cast Iron Pan? Easy Step-by-Step


How do you make an old pan look new?

Start by bringing one quart of water to a boil, and then stir in two teaspoons of baking soda (more if you have a bigger pan). While giving the mixture the occasional stir with a wooden spoon or any other non-abrasive implement, let it boil for a few minutes. The burned-on pan should be washed in hot water and then dried completely.

How do you restore pots and pans?

The Vinegar and Baking Soda Method

  • Combine water and distilled white vinegar in proportions that are equal….
  • Put the pot on the burner, and bring the water to a full boil in it.
  • After allowing it to boil for a few minutes, drain the stuff that has been produced out of the pot.
  • After coating the inside of the pot with a thin layer of baking soda, clean it carefully with a brush with delicate bristles.

How do you fix a tarnished pan?

Tartare Sauce, or Cream of Tartar

In a saucepan that has been burned, combine one tablespoon of it with one cup of water and bring the mixture to a boil. Let the water come to room temperature. Scrub the pot well to restore its sheen and gloss.

How do you clean tarnished pans?

How to Clean Roasting Pans

  • The Surface Should Have Some. Baking soda should be liberally sprinkled over the surface of the…
  • Create Fizz. Mix up one cup of boiling water and one-third of a cup of vinegar, then pour the resulting solution into the pan….
  • Soak and Scrape. Let the pan soak for a few hours. …
  • To wash and then rinse.

How do you make non stick pans look new?

In order to do this, just combine one cup of water, two teaspoons of baking soda, and one-half cup of white vinegar in the saucepan or pot that is no longer sticking, then place it on the burner and heat it until it is boiling for ten minutes. After washing the pot as you normally would, re-seasoning it and restoring its non-stick surface by rubbing vegetable oil on it is the next step.